Aeroponics high pressure booster pump Aquatec CDP 8855 + transformer 130 psi USA

Description

Aquatec 8855 Booster Pump + 3 Amp Transformer MADE IN U.S.A.
Aquatec pump #  8855-2LM2-B534   (custom made pump for aeroponics and misting and 300GPD RO systems)
Our internal part # AQ8855-TRM-115V
For Aeroponics high pressure applications
For Misting applications
For 200GPD to 380GPD RO systems
Important Note:  8855 is FilterDirect internal part number which is different from Aquatec part number.  There will be overlay sticker #8855 affixed onto the pump and this is not against Aquatec policy.   FilterDirect is an authorized distributor of Aquatec.  If you have any doubt about our products and services please do not make a purchase.
Why buy from FilterDirect ?
Best price and best service.
We offer free tech support on the pumps, setup, and its applications. Please email or call before making purchase to ensure that this is the correct product.
We get the pumps directly from the manufacturer so they are always under warranty and most up-to-date. All brand NEW.
The Pump includes:
Pump                     Aquatec 8855 pump to boost input water pressure up to 130 psi  (actual boost pressure depends on your RO system production rate and drain rate)  For aeroponics or misting applications the boost pressure depends on total output flow rate of nozzles.
Inlet/Outlet:           3/8" quick connect, for 3/8" O.D. tubing
Transformer:    heavy duty transformer, 115VAC to 24VAC, 3 Amp, plug in to regular 110V electrical outlet, USA plug.
Instruction sheet
Two of 3/8 to 1/4 reducer fitting (in case you want to connect 1/4" OD tubing)
NOTE
:  This pump assembly
is a intermitten duty, not a continuous duty
.  If you need to run the pump more than 4 hours non-stop, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and transformer, or you can put a fan to blow air into the pump assembly to cool it down.
SPECIAL NOTE FOR AEROPONICS APPLICATIONS:
You can use a timer to control the pump, when to turn on/off  and the time interval it stays on.
Since this pump is very powerful and high flow, for small aeroponic system, you don't need a output pressure tank or pressure switch.
For larger aeroponic system, you can add a pressure tank, a pressure switch to the output side,  we do carry this special tanks and high pressure switch in our ebay stores under the Aeroponics cataglory.
Aquatec Boost Pump
CDP 8800 series pump flow rate comparison chart:
Model 8851 -  at open flow, flow rate is 2.10 Liter per minute, at 80 psi, 1.2 L/min. , boost up to 80 psi
Model 8852 - at open flow, flow rate is 2.60 Liter per minute,  at 80 psi, 1.4 L/min., boost up to 80 psi
Model 8855 - at open flow, flow rate is 3.8 Liter per minute,  at 80 psi, 2.0 L/min. ,  boost up to 130 psi
Specifications:
Booster Pump:
Boost pressure
boost pressure depends on output flow rate, the pump is capable for boosting up to 130 psi, It is also to boost water pressure from 0 psi to 100 psi for aeroponics applications
Water open flow
3.8 liter per minute or 1 gallon per minute
Electrical:
24VAC
Connection
Inlet and outlet,  3/8" quick connect, connects to 3/8" OD tubing
Motor
Permanent Magnet,  24VAC, enclosed
PUMP
Diaphragm pump, 3 chamber, self-priming.  It is able to run dry
Material:  Housing
Nylon
Valves
EPDM
Diaphragm
Santoprene
Fasteners
Stainless Steel
Dimension & weight
diameter = 3.5" , length = 7.5", weight is about 5 lbs
Transformer
Input
115V/60Hz
Output
24VAC  3A
Leads
18 AWG, 4 feet
Any questions please feel free to call during business hours M-F 9am to 4:30pm PST